Make:

Babcock Wire Equipment

Type:

450T Tandem Rod Breakdown Machine

Description:

(depending on model)

Modular design enables this machine to be supplied with 7, 10, 13 or 16 dies, dependent on the required duty. 16 finishing speeds are obtainable by the combined use of the main and capstan gearboxes, both of which are integral with the machine housing to ensure that the available motor power is fully utilised. The pullblocks can be fitted with replaceable tyres or replaceable rings.

Standard drafting is 31% elongation, although taper drafting or special drafting can be supplied if required.  The 450T series of machines are ideal for the drawing of high quality copper, aluminium and aluminium alloys.

Specification:

Maximum Entry

10mm soft copper or 12.7mm E.C. aluminium

Finish Diameter

1.0mm to 5.18mm diameter

Maximum Finishing Speed

40 m.p.s.

Elongation Per Die

31%

Block diameter

450mm

Maximum Motor

350 h.p.

PDF logo View 450T spec sheet

Picture: 450T13 Tandem Rod Breakdown Line

 

© 2006-09 Goodwin Machinery Ltd · Terms & Conditions Apply
Bay 1, Mule Street, Bolton, BL2 2AR, UK

Tel: 00 44 161 724 8989 · www.wingetsyncro.co.uk & www.babcockwire.co.uk